Skip to main content

Shadely

How to Install Zip Blinds

Zip blinds are one of the easiest outdoor blinds to install yourself. Most openings take two people about two to three hours. Follow these steps alongside the instructions supplied with your blind.

Updated: November 2026

1

Before You Start

Unpack everything and check it against the packing list: the headbox with the fabric rolled inside, two side channels, the bottom rail, brackets, fixings and the crank or motor. Check your fixing surface is solid timber, steel or masonry.

  • Drill and drill bits to suit your surface
  • Spirit level and tape measure
  • Pencil
  • Screwdriver or impact driver
  • Stable ladder (two if possible)
  • Silicone and a caulking gun, if your instructions call for it
2

Safety First

Work with a second person when lifting headboxes, awnings or roof parts, and use a stable ladder on firm, level ground. Wear eye protection when drilling. Check for hidden pipes and cables before you drill.

Motorised with a hardwired motor? In Australia, all mains electrical work must be done by a licensed electrician. You can install the product yourself and have an electrician connect the power, or book professional installation.

3

Step by Step

  1. Mark the bracket positions. Hold the headbox in place, check it’s level and mark the bracket positions in pencil. Your instructions show where the brackets go.
  2. Fix the brackets. Drill and fix each bracket with fixings to suit your surface. Check they line up and are level.
  3. Mount the headbox. With a helper, lift the headbox into the brackets and lock it in place as shown in your instructions.
  4. Fit the side channels. Position each channel against the opening, check it’s plumb with a spirit level, and fix it top to bottom. Channels must be straight and parallel for the fabric to run smoothly.
  5. Lower the blind. Slowly crank or power the blind down, guiding the zip edges into the channels. Never force it.
  6. Set the bottom rail and stops. Adjust the bottom rail and any stops so the blind sits snugly at the bottom of the opening.
  7. Run it up and down. Raise and lower the blind several times to check it runs smoothly and evenly on both sides.
4

Final Checks

  • The headbox is level and every fixing is tight
  • The fabric runs smoothly without wrinkling or catching
  • The bottom rail sits evenly against the floor or sill
  • Motorised: the up and down limits stop in the right places
5

Need a Hand?

Stuck at any step? Call 1300 468 410 (Monday to Friday, 9am to 5pm AEST) or send us photos and we’ll talk you through it. Prefer not to DIY? Get an installation quote.

Prefer a Professional Install?

Our installers can measure, fit and test your shade for you.